Mr-Glass Windows & Doors Nationwide

Mr-Glass Windows & Doors: The San Diego Owner’s Guide

We stock and install Mr-Glass-compatible windows and doors across San Diego, with most replacement units running $5,310-$17,700 installed depending on size, series, and whether the frame needs rework. Most standard sizes are available same-day through our supplier network; custom glass configurations typically take 3-5 business days. Homeowners usually discover a problem when they feel a draft they can’t trace, notice condensation between panes that won’t wipe away, or find the sash won’t stay open on its own - the kind of slow failure that gets worse through San Diego’s marine layer cycles.

Call (858) 434-8926

Which Mr-Glass Models This Applies To

Mr-Glass produces several window and door series, and the part you need depends on which generation you own. Look for the etched logo in the glass corner or the aluminum spacer bar label between panes; pre-2018 units often carry a stamped code on the hinge side of the frame. The 5000 Series vinyl double-hung and 7000 Series sliding patio door are the most common in San Diego tract homes built between 2010 and 2019, while the 9000 Series fiberglass casement appears more often in custom builds from the same period.

OEM glass packs for Mr-Glass are built to a 1-inch overall unit thickness with a warm-edge spacer, but we’ve found that Cardinal Glass aftermarket equivalents match the thermal performance spec at roughly 15% less cost. The catch: Mr-Glass used two different locking hardware suppliers during the 2015-2018 run, and the cam lock footprint differs by 3/16 inch. We measure on-site before ordering, because guessing wrong means a second trip and a delayed install. Rowan Construction Group San Diego is an independent service provider, not affiliated with Mr-Glass.

Signs Your Mr-Glass Windows & Doors Is Failing

• Fog or moisture between panes that doesn’t wipe off. The insulating glass unit (IGU) seal has failed, allowing humid air into the cavity. In coastal San Diego, salt-laden moisture accelerates spacer corrosion once the seal breaches.
• Sash drops or won’t stay open. The balance system, either a coil spring or block-and-tackle type depending on series year, has lost tension. We see this most often on south-facing units where daily thermal cycling fatigues the metal.
• Difficulty latching or visible gap when closed. The keep (strike plate) has shifted or the multipoint lock mechanism has worn. Frame settling in older San Diego stucco homes often contributes.
• Visible draft around the frame perimeter. Compression weatherstrip has hardened or the frame-to-wall sealant has separated. The marine layer keeps this material damp longer than inland climates, shortening effective life.
• Cracked or chipped glass with no impact point. Thermal stress fracture from uneven heating, common when interior shades trap heat against the pane while the exterior faces cool ocean air.

Before

After

Replacement Cost & What’s Included

For Mr-Glass window and door replacement in San Diego, expect $5,310-$17,700 per opening installed, with most standard double-hung replacements falling in the $6,500-$9,400 range. The spread comes down to four factors: unit size, glass package (dual-pane standard vs. Low-E/argon upgrade), whether the existing frame is square and structurally sound, and stucco or siding repair scope after the swap.

Our quotes itemize parts and labor separately, and we pull permits when required by the local jurisdiction - included in the flat price, not added later. Under Clause 1 of The Haven Standard, that written price is delivered before any work starts. Every replacement carries our 365-Day Done Right Promise, and you receive a documented photo record of the opening condition before and after, included as standard.

DIY or Call Us?

A homeowner can safely check a few things: verify the model stamp, measure the daylight opening (width by height of the visible glass), and confirm whether the frame is square with a basic level. What we don’t recommend is removing a fixed sash or attempting to reglaze an IGU yourself - the glass edges are sharp, the units are heavy, and an improper seal voids any warranty on the replacement.

For patio door rollers or multipoint hardware, the adjustment screws are often buried under trim that disturbs the weather seal when removed. We’ve been called to jobs in Clairemont and Mira Mesa where the DIY attempt turned a $340 roller replacement into a full frame rework. Measure twice, document once, then we can talk price. Call (858) 434-8926 to schedule your free estimate.

FAQs